TOP > Products > Smart Laser Features > Specification

Smart Laser Specification

Main Unit

  • TL-150LDA

    TL-150LDA

Model TL-150LDA 〈LD〉 TL-300LDA 〈LD〉 TL-450LDA
Beam Source Yb
Laser Wave Length 1070nm
Laser Excitation System Semiconductor Excitation
Average Output
(Pulse Oscillation)
150W 300W 450W
Peak Power 1.5kW 3.0kW 4.5kW
Average Output
(CW Oscillation)
250W 300W 450W
Output Setting 10% to 100%  (per 1%)
Pulse Output Time 0.2 to 50ms  (per 0.1ms)
Frequency CW to 50Hz (1Hz step)
*Euipped CW Modulation Mode
Configurable Max. Joule Amount 15J / P 30J / P 35J / P
Laser Spot Dia dia. 0.1 to 2.0 (Arbitrarily Variable)
*When using Overlay Head
Microscope Ocular Lens: ×10
Objective Lens:× 1
Visual Field Qty: 23 SUPER WIDE FIELD (SWF)
Focal Length: 150mm (Standard) , 80mm・200mm (Optional)
Dimension
(Power Supply Unit)
W450 × L830 × H860mm
(W340 × L680 × H660mm)
W545 × L958 × H990mm
Weight
(Power Supply Unit)
85kg (65kg) 85kg (68kg)   130kg
Power Supply Single Phase AC 200V (50 / 60Hz)
Allowable Voltage Fluctuation ± 10%
Max. Electric Power Consumption 1.2kWh 1.5kWh 2.2kWh
*Specifications of this product may be changed without notice for improvement of functions etc.
*LDA: Equitable Robot I/O Port and Handy Torch, CW Modulation Mode equipped.
*CW Modulation Mode: Adjustable unit about 2,500Hz max. (Not available on TL-150LD/300LD)

Smart Torch

  • HT10〈for Sheet Metal〉

    HT10〈for Sheet Metal〉

  • HT20 〈for Overlay〉

    HT20〈for Overlay〉

  • VRゴーグル

    VR Goggles

Model HT10〈for Sheet Metal〉 HT20〈for Overlay〉
Supported Wave Length 1070nm
Fiber Connector D 80
Laser Output Usable until Ave. 450W
Collimator dia. 15mm, f 18mm, f36mm AR Coated both sides
Focusing Lends Unit dia. 15mm, f 100mm AR Coated both sides
Spot dia. = dia. 0.5mm Spot dia. = dia. 1.0mm
Protective Glass dia. 15mm, t 1.0mm AR Coated both sides
Dimension 204 × 40 × 172mm 204 × 35 × 172mm
Weight About 0.7kg About 0.65kg

*Specifications of this product may be changed without notice for improvement of functions etc.
*Safety Functions More 〉

Safety equipment

TechnoCoat Laser Overlay / Welding Systems are Class 4 Laser products, and safety measures to prevent damage due to laser light has been decorated.
At the time of use, it is recommended safety management implementation of the class correspondence.
It is able to execute Safety Education and Training relating to the Laser Light according to request.
  • Protective Filter・ Electric Shutter

    Protective Filter・ Electric Shutter

    ・Equipped IR Cut Filter shutters Infrared Light
    ・Electric Shutters shutter Plasma and Strong Visible Light
    ・Leakage Light inspected from the microscope
     (Inspection Equip.: OPHIR Corp. PD300 Sensor)
  • Shielding Plate

    Shielding Plate

    ・Suppress Reflected Light to Operator
  • Pilot Lamp (Optional)

    Pilot Lamp (Optional)

    Displaying of Operation State by Light and Sound
    ・Yellow: Stand-By
    ・Green: Laser Irradiation
    ・Red: Error (Lighting / Buzzer)
  • Key Switch / Emergency Stop Button

    Key Switch / Emergency Stop Button

    ・Operational Management by Key Switch
    ・Equipped with an emergency of Emergency Stop Switch

Contact Form